Home / news /
  • 8/08
    What is the minimum distance that two proximity sensors can be
    When placing sensors parallel to each other, always leave a minimum distance equal to the diameter (12mm, 18mm or 30mm)of the sensors.
  • 8/08
    Can proximity sensors be connected in series?
    Yes. The number of proximity sensors connected in series is dependent on the available voltage to energize the PLC input or load. This voltage is calculated as the sum of voltage drops across each sensor subtracted from the available power supply voltage. Let's use as an example three of the
  • 27/06
    Omron expands its range of space-saving 6 mm industrial relays
    Our G2RV range of plug-in industrial relays, the only truly industrial 6 mm relay available on the market, has now been extended to include relays specifically designed to reliably switch sensitive loads like input signals. Ideally suited for interfacing input applications, including the
  • 12/12
    ​The Great Benefits Of Installing Active Infrared Sensors
    The Great Benefits Of Installing Active Infrared Sensors A lot of people these days are looking for the best type of home security system that will be an effective way to shield their home and family from burglars and thieves that may cause harm to them. There are lots of new products in the market
  • 9/12
    Active Infrared Sensors - Used For Uninterrupted Protection From
    Active Infrared Sensors - Used For Uninterrupted Protection From Intruders Active infrared sensors use both infrared source and infrared detectors. They operate by transmitting energy from either a LED or light emitting diode or a laser diode. While the former id used for a non-imaging active
  • 8/12
    ​You Should You Know About The VFD Operation If Owning One
    You Should You Know About The VFD Operation If Owning One In an induction motor is a voltage that on several (connected up to about 6 times basis) of its rated current. Since the charge is accelerated, the available torque drops usually rises a little, then a maximum, while the current remains high
  • 8/12
    ​You Should You Know About The VFD Operation If Owning One
    You Should You Know About The VFD Operation If Owning One In an induction motor is a voltage that on several (connected up to about 6 times basis) of its rated current. Since the charge is accelerated, the available torque drops usually rises a little, then a maximum, while the current remains high
  • 5/12
    ​Why Choose A Variable Frequency Drive? You Have 9 Reasons?
    Why Choose A Variable Frequency Drive? You Have 9 Reasons A variable frequency drive controls and regulates the electrical power that runs any given motor by making it more productive. It is also great for large universities, hospitals, industrial plants, general commercial buildings, and even
  • 8/08
    ​A Frequency Converters And Its Essential Applications
    A Frequency Converters And Its Essential Applications Frequency converters are also called frequency changers and they are electro mechanical operated devices which are employed for the operation of conversion of AC of a single frequency to the alternating current of another frequency. Such
  • 8/08
    ​What Are The Main Considerations When Selecting A Differential
    What Are The Main Considerations When Selecting A Differential Pressure Sensor Important considerations when selecting a differential pressure sensor are presented. These include the highest level of pressure and the range of differential pressures that the sensor can take. First of all, this
1
...