Add To Cart
share
VTE180-2P42482 Overview
PHOTOELEC. PROXIMITY SW.
VTE180-2P42482 Description
- Photoelectric proximity sensor with background suppression due to focused optics or as an energetic variant with a large scanning distance
- Visible red light with homogenous and extremely bright light spot makes for easier alignment
- High switching frequencies of 1000Hz
- Standardized connection system with cable or M12 device connector
- Compact M18 metal or plastic housing
- Short reaction time enables reliable detection including in dynamic processes and with high-speed objects
- High operating reserves and access to new solutions due to three different scanning distances and homogeneous system specifications for all variants
- The answer to economic challenges thanks to simple mounting, standardized connection technology and universal use.
- Convenient, fast, compatible thanks to optimum visibility emitter LED, two status indicator LEDs with 360 all-round visibility, extra short housing
- Compatible and economical due to standardized M18 housing and interfaces
- Visible red light plus sensitivity control enables quick and easy commissioning and adjustment
- 2 indicator LEDs with 360 all-round visibility for easily-recognizable reporting about operating status
Your benefits
| Features | |
| Sensing range max.: | 1 mm ... 1,100 mm 1) |
| Sensing range: | 1 mm ... 800 mm |
| Housing desig (light emission): | Cylindrical, straight, straight |
| Light source: | LED 2) |
| Type of light: | visible red light |
| Wave length: | 645 nm |
| Sensitivity adjustment: | Potentiometer, 270 |
| Housing length: | 69.8 mm |
| Thread diameter (housing): | M18 x 1 |
| Sensor/detection principle: | Photoelectric proximity sensor, energetic |
| Light spot (distance): | 30 mm (800 mm) |
| Optical axis: | axial |
| 1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 10 % 2) |
| Power consumption: | ≤ 30 mA 3) |
| Switching output: | PNP, light/dark-switching, Selectable via L/D control wire, open collector 4) |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 0.5 ms 5) |
| Switching frequency: | 1,000 Hz 6) |
| Connection type: | Connector M12, 4-pin |
| Protection class: | III |
| Circuit protection: | A B D 7) 8) 9) |
| Weight: | 47 g |
| Housing material: | Nickel-plated brass and PC |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 55 C |
| Ambient temperature, storage: | -40 C ... 70 C |
| Items supplied: | fastening nuts (2 x) |
| Output state-LED: | - |
| Signal voltage PNP HIGH / LOW: | approx. VS - 1.8 V / 0 V |
| Angle of dispersion: | Ca. 1.2 |
| 1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Control wire open: dark-switching D.ON 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products