Add To Cart
share
Sick WTB27-3P2483 Overview
Refelx Array Sensor
Sick WTB27-3P2483 Description
- Two complete and independent receiver systems
- HighPower LED, extreme light intensity
- Special software.
- Sensing distance up to 500 mm
- fast and easy commissioning thanks to the very good visible red HighPower LED
- Highest functionality with low invest: due to the extreme reliable, redundant detection of objects (shiny, glossy, irregular) without any interruption of the signal.
- Reduced mechanical effort:One fixed position of the sensor, no mechanical adjustment during operation while changing of the product.
- Increase of the productivity of multi transport lines: Therefore each line of bundle transport can be monitored and controlled more efficiently (≥ 2 lines). No need to mount a reflector.
Your benefits
| Features | |
| Dimensions (W x H x D):: | 24.6 mm x 80.6 mm x 54.8 mm |
| Sensing range max.: | 30 mm ... 500 mm 1) |
| Sensing range: | 100 mm ... 500 mm |
| Housing desig (light emission): | Cuboid |
| Light source: | LED 2) |
| Type of light: | visible red light |
| Wave length: | 625 nm |
| Adjustment of operating distance: | Teach-in: double teach button |
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression |
| Light spot (distance): | O 12 mm (500 mm) |
| 1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 66 IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | ≤ 5 Vpp 2) |
| Power consumption: | ≤ 55 mA 3) |
| Switching output: | PNP, Complementary |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 5 ms 4) |
| Switching frequency: | 100 Hz 5) |
| Connection type: | Connector M12, 4-pin |
| Protection class: | II 6) |
| Circuit protection: | A B C 7) 8) 9) |
| Weight: | 150 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -30 C ... 60 C |
| Ambient temperature, storage: | -40 C ... 75 C |
| Signal voltage PNP HIGH / LOW: | approx. VS - 2.5 V / 0 V |
| Special device: | - |
| IO-Link: | - |
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Reference voltage 50 V DC 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) C = interference suppression | |
Contact Us
Hot Products