Add To Cart
share
Sick WT14-2P932S19 Description
- PinPoint LED with small, highly visible, precise light spot
- Background suppression
- Sensing range can be set via potentiometer
- High immunity to ambient light
- Rugged plastic housing
- Highly visible PinPoint red light provides simple alignment and fast installation
- Long sensing ranges due to PinPoint technology
- Reliable object detection with background suppression
- Quick and easy sensing range adjustment due to 4-speed potentiometer
- Crosstalk and ambient light immunity reduces false trips and downtime
- High availability in the field
Your benefits
| Features | |
| Dimensions (W x H x D):: | 17.6 mm x 75.5 mm x 33.5 mm |
| Sensing range max.: | 20 mm ... 1,300 mm 1) |
| Sensing range: | 50 mm ... 1,300 mm 2) |
| Housing desig (light emission): | Cuboid, Slim |
| Light source: | PinPoint LED 3) |
| Type of light: | visible red light |
| Wave length: | 637 nm |
| Sensitivity adjustment: | Potentiometer, 4-turn |
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression |
| Light spot (distance): | 7 mm (300 mm) |
| 1) 2) Object with 90 % reflectance (referred to standard white DIN 5033) 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 5 Vpp 2) |
| Power consumption: | ≤ 25 mA 3) |
| Switching output: | PNP, light/dark-switching, Complementary |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 2.5 ms 4) |
| Switching frequency: | 200 Hz 5) |
| Connection type: | Cable with plug, M12, 4-pin, 0.29 m 6) |
| Circuit protection: | A C D 7) 8) 9) |
| Weight: | 40 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -30 C ... 60 C |
| Ambient temperature, storage: | -40 C ... 70 C |
| Voltage supply-LED: | ![]() |
| Output state-LED: | ![]() |
| Special device: | ![]() |
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products