Sick WSE4-3P2230S02 (1043260)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick WSE4-3P2230S02 (1043260)

Add To Cart

Your benefits

The PinPoint LED's sharply defined, intense light spot makes alignment quick and easy
Low-cost machine integration due to small dimensions that enable mounting in areas with space restrictions
Rugged mounting system with M3 threaded metal inserts reduces maintenance costs due to a long service life

Features
Dimensions (W x H x D)::	16 mm x 39.5 mm x 12 mm
Sensing range max.:	0 m ... 0.9 m
Sensing range:	0 m ... 0.6 m
Housing desig (light emission):	Cuboid, Flat
Light source:	PinPoint LED ¹⁾
Type of light:	visible red light
Wave length:	650 nm
Sensor/detection principle:	Through-beam photoelectric sensor
Light spot (distance):	210 mm (2 m)
¹⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67 IP 66
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	< 5 Vpp ²⁾
Power consumption:	≤ 20 mA ≤ 20 mA ≤ 20 mA ³⁾ ⁴⁾ ⁵⁾
Switching output:	PNP, light/dark-switching
Output current Imax.:	≤ 100 mA
Response time:	< 0.1 ms ⁶⁾
Switching frequency:	5,000 Hz ⁷⁾
Connection type:	Connector M8, 4-pin
Protection class:	III
Circuit protection:	A C D ⁸⁾ ⁹⁾ ¹⁰⁾
Weight:	60 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-40 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Test input sender off:	TE to 0 V
Special device:	-
Angle of reception:	3
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Sender ⁴⁾ ⁵⁾ Receiver ⁶⁾ Signal transit time with resistive load ⁷⁾ With light/dark ratio 1:1 ⁸⁾ A = V_S connections reverse-polarity protected ⁹⁾ C = interference suppression ¹⁰⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products