Sick WSE4S-3F3430 (1051883)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick WSE4S-3F3430 (1051883)

Add To Cart

Best background suppression sensor in its class
Photoelectric retro-reflective sensor for transparent objects reliably detects all known objects
Universal use of PinPoint LED technology in all models
BGS proximity sensor with laser-like light spot for precise detection tasks
Reliable setting via 5-turn potentiometer, teach-in pushbutton, teach-in via cable or IO-Link

Your benefits

Application versatility due to reliable detection of shiny, transparent or jet-black objects
IO-Link or teach-in pushbuttons enable sensors to be quickly commissioned
Very quick and easy alignment due to the highly visible, intense PinPoint LED light spot
Rugged mounting system with M3 threaded metal inserts reduces maintenace costs due to a long service life
Background suppression sensors with a laser-like light spot reduce costs and installation of additional protective measures by replacing laser sensors

Features
Dimensions (W x H x D)::	16 mm x 39.5 mm x 12 mm
Sensing range max.:	0 m ... 5 m
Sensing range:	0 m ... 4.5 m
Housing desig (light emission):	Cuboid, Slim
Light source:	PinPoint LED ¹⁾
Type of light:	visible red light
Wave length:	650 nm
Sensor/detection principle:	Through-beam photoelectric sensor
Light spot (distance):	130 mm (2 m)
¹⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67 IP 66
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	< 5 Vpp ²⁾
Power consumption:	≤ 20 mA ≤ 20 mA ≤ 20 mA ³⁾ ⁴⁾ ⁵⁾
Switching output:	PNP, Dark-switching
Output current Imax.:	≤ 100 mA
Response time:	< 2.5 ms ⁶⁾
Switching frequency:	200 Hz ⁷⁾
Connection type:	Cable with plug, M12, 4-pin, 150 mm ⁸⁾
Cable material:	PVC
Conductor cross-section:	0.14 mm2
Cable diameter:	3.4 mm
Protection class:	III
Circuit protection:	A C D ⁹⁾ ¹⁰⁾ ¹¹⁾
Weight:	40 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-40 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Test input sender off:	TE to 0 V
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Sender ⁴⁾ ⁵⁾ Receiver ⁶⁾ Signal transit time with resistive load ⁷⁾ With light/dark ratio 1:1 ⁸⁾ Do not bend below 0 C ⁹⁾ A = V_S connections reverse-polarity protected ¹⁰⁾ C = interference suppression ¹¹⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products