Add To Cart
share
Sick WLG4S-3F3132 Overview
Photoelectric Reflex Switch WLG4S-3F3132 for transparent objects, PNP, dark switching /Q, Teach-in, 100 mm cable with M8 connector, 3 pin
Sick WLG4S-3F3132 Description
- Continuous adaptation of the switching threshold when there is soiling
- Temperature compensation for stable working point
- Small, highly visible, sharply defined light spot
- Detection of glass with damping > 8%
- Teach-in function for fast and simple commissioning
- The all-around carefree package provides "best-in-glass" performance since all known transparent objects can be reliably detected
- Less downtime due to reliability of usage under changing environmental conditions - temperature, dust and drift effects are continually compensated by the adapting switching threshold.
- Simple and fast setting with a single press of the teach-in button
Your benefits
| Features | |
| Dimensions (W x H x D):: | 16 mm x 39.5 mm x 12 mm |
| Sensing range max.: | 0.01 m ... 5 m 1) |
| Sensing range: | 0 m ... 3 m 2) |
| Housing desig (light emission): | Slim |
| Light source: | PinPoint LED 3) |
| Type of light: | visible red light |
| Wave length: | 650 nm |
| Adjustment: | adjustable |
| Sensitivity adjustment: | Adjustable Teach |
| Teach-in: | single |
| Sensor/detection principle: | Photoelectric retro-reflective sensor, autocollimation |
| Light spot (distance): | 45 mm (1.5 m) |
| 1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 IP 66 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | < 5 Vpp 2) |
| Power consumption: | 20 3) |
| Switching output: | PNP, Dark-switching |
| Output current Imax.: | 100 |
| Response time: | < 0.5 ms 4) |
| Switching frequency: | 1,000 With light/dark ratio 1:1 |
| Connection type: | Cable with plug, M8, 3-pin 100 mm 5) |
| Cable material: | PVC |
| Conductor cross-section: | 0.14 mm2 |
| Cable diameter: | 3.4 mm |
| Protection class: | III |
| Circuit protection: | A C D 6) 7) 8) |
| Weight: | 30 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -40 C ... 60 C |
| Ambient temperature, storage: | -40 C ... 75 C |
| Polarisation filter: | ![]() |
| Angle of reception: | 30 |
| Attenuation along light beam: | > 8 % |
| Special Design: | for transparent objects |
| 1) Limit values 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products