Add To Cart
share
Sick WL8-P1131S03 Description
- Reliable object detection even at the shortest distances (no blind spot) or through narrow gaps
- Highly visible light spot makes alignment quick and easy
- Autocollimation combined with 2 kHz switching frequency ensures reliable detection of small objects, even at fast detection speeds
- M3 threaded holes provide quick installation
- Polarization filters prevent false readings on glossy objects
- All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs
Your benefits
| Features | |
| Dimensions (W x H x D):: | 11 mm x 31 mm x 20 mm |
| Sensing range max.: | 0 m ... 4 m 1) |
| Sensing range: | 0 m ... 3 m 2) |
| Housing desig (light emission): | Cuboid, Slim |
| Light source: | LED 3) |
| Type of light: | visible red light |
| Wave length: | 650 nm |
| Sensitivity adjustment: | Potentiometer, 270 |
| Sensor/detection principle: | Photoelectric retro-reflective sensor, autocollimation |
| Light spot (distance): | 30 mm (1 m) |
| Alarm output: | - |
| 1) 2) PL80A 3) Average service life of 100,000 h at TA = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 10 % 2) |
| Power consumption: | ≤ 30 mA 3) |
| Switching output: | PNP, light/dark-switching, manually selectable, open collector |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 25 ms 4) |
| Switching frequency: | 2,000 Hz 5) |
| Connection type: | Cable, 3-wire, 2 m 6) |
| Cable material: | PVC |
| Circuit protection: | A B D 7) 8) 9) |
| Weight: | 50 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 55 C |
| Ambient temperature, storage: | -40 C ... 70 C |
| Polarisation filter: | ![]() |
| Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A |
| Focus adjustable: | - |
| Voltage supply-LED: | - |
| Output state-LED: | - |
| Signal voltage PNP HIGH / LOW: | approx. VS - 1.8 V / 0 V |
| Special device: | - |
| Special features: | Fixing hole o 3.2 mm without thread, distance between mounting hole 23 mm |
| Front screen heating: | - |
| AS-Interface-Chip: | - |
| Anti-interference: | 0 |
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) B = output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products