Add To Cart
share
Sick WL260-S270S01 Overview
Photoelectric Reflex Switch WL260-S270S01
Sick WL260-S270S01 Description
- Long sensing ranges
- Mounting bracket and reflector included with delivery
- Selectable operation mode (light/dark)
- Optional time stages
- M12 connector or terminal chamber
- Versions for 10 - 30 V DC or 12 - 240 V DC/ 24 240 V AC voltage supply
- High operating reserve provides increased reliability
- Configuration controls are protected by a cover, ensuring less damage and a longer service life
- Easily accessible terminal chamber for electrical connections simplifies installation
- Simplified integration due to mounting compatibility since variants for DC or DC/AC voltage supply are available in the same design
- Polarizing filter ensures reliable detection, even with shiny targets
Your benefits
| Features | |
| Dimensions (W x H x D):: | 25 mm x 78 mm x 63 mm |
| Sensing range max.: | 0.01 m ... 15 m 1) |
| Sensing range: | 0.01 m ... 10 m 0.01 m ... 13 m 2) 3) |
| Housing desig (light emission): | Cuboid |
| Light source: | LED 4) |
| Type of light: | visible red light |
| Sensitivity adjustment: | Potentiometer, 270 |
| Sensor/detection principle: | Photoelectric retro-reflective sensor |
| Light spot (distance): | 300 mm (10 m) |
| 1) 3) PL80A 2) P250 4) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 12 V DC ... 240 V DC 24 V AC ... 240 V AC 1) 2) |
| Switching output: | Relay, light switching, change-over contacts, electrically isolated 3) |
| Response time: | ≤ 20 ms |
| Switching frequency: | 25 Hz 4) |
| Connection type: | Cable gland |
| Protection class: | II 5) |
| Circuit protection: | A C 6) 7) |
| Weight: | 120 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 55 C |
| Ambient temperature, storage: | -40 C ... 70 C |
| Polarisation filter: | ![]() |
| Items supplied: | mounting bracket BEF-W260, Reflector P250 |
| Special device: | ![]() |
| Angle of dispersion: | 1.7 |
| Power consumption: | ≤ 5 VA |
| Switching current (switching voltage): | 3 A (240 V AC) 3 A (30 V DC) |
| Usage category: | AC-15, DC-13, according to EN 60947-1 |
| Interference emission: | "residential and commercial areas", Level EN 61000-6-3 |
| 1) 2) +-10 % 3) Provide suitable spark supression for inductive or capacitive loads 4) With light/dark ratio 1:1 5) Rated voltage 250 V AC/DC 6) A = VS connections reverse-polarity protected 7) C = interference suppression | |
Contact Us
Hot Products