Add To Cart
share
Sick WL24-X2301 Overview
Reflex Photoelectric Switch WL24-X2301 Ex II 2 G EEx ia IIC T4
Sick WL24-X2301 Description
- Marking: Ex II 2G EEx ia IIC T4 according to Directive 94/9/EC (ATEX)
- According to category 2G
- Switching output: EN 60947-5-6 (NAMUR)
- Red light
- Device plug can be rotated through 90
| Product features | |
| Sensing range min ... max: | 0 m ... 15 m, 0 m ... 8 m |
| Relating to: | Reflector PL80A |
| Sensitivity adjustment: | Potentiometer |
| Light source: | LED |
| Type of light: | Red light |
| Light spot diameter: | Approx. 145 mm at 8 m distance |
| Technical data | |
| Design: | cuboid |
| Dimensions (W x H x D): | 27 mm x 87.5 mm x 65 mm |
| Supply voltage min ... max: | DC 5 ... 13.5 V |
| Ripple: | 0.4 Vpp |
| Hazardous area category: | 2G |
| EC type approval certificate: | PTB 03 ATEX 2104 |
| Switching output: | Control current dependent on switching state |
| Switching mode: | Light switching |
| Response time: | <= 10 ms |
| Switching frequency: | 50 Hz |
| Connection type: | Cable gland, Terminal, PG9 |
| Circuit protection: | VS connections reverse-polarity protected / Interference suppression |
| Enclosure rating: | IP 67 |
| Ambient operation temperature, min ... max: | -20 C ... +50 C |
| Ambient storage temperature, min ... max: | -25 C ... +70 C |
| Weight: | ca. 330 g |
| Front screen heating: | - |
| Polarisation filter: | - |
| Housing material: | die-cast zinc |
| Input voltage: | 15.5 V |
| Input power: | 100 mW |
| Internal capacitance: | 80 nF |
| Internal inductance: | 80 H |
Contact Us
Hot Products