Sick WL15-B2430 (1043324)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick WL15-B2430 (1043324)

Add To Cart

Photoelectric reflex switch bipolar

Photoelectric retro-reflective sensor in hybrid design with 5 m sensing range
Mounting flexibility: M18 front mount using plastic nut or snap ring, side assembly with 24.1 mm through holes
Flush mounting possible using the snap ring
Transparent back cover
Highly visible sender LED
Options with an adjustable delay of 0 - 2s

Your benefits

Compatible with many competitor models, making it easy to install and commission
Flush mounting reduces setup time and prevents obstructions to material flow on conveyor sections
Clearly visible LED indicators reduce setup time and simplify troubleshooting
Quick and easy alignment due to highly visible light spot

Features
Dimensions (W x H x D)::	16.2 mm x 48.5 mm x 31.9 mm
Sensing range max.:	0.035 m ... 5 m
Sensing range:	0.035 m ... 3.5 m
Housing desig (light emission):	Hybrid
Light source:	LED ¹⁾
Type of light:	visible red light
Wave length:	650 nm
Thread diameter (housing):	M18 x 1
Sensor/detection principle:	Photoelectric retro-reflective sensor
Light spot (distance):	140 mm (3.5 m)
¹⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	≤ 5 Vpp ²⁾
Power consumption:	≤ 30 mA ³⁾
Switching output:	PNP, light switching NPN, light switching
Output current Imax.:	≤ 100 mA
Response time:	≤ 1.25 ms ⁴⁾
Switching frequency:	400 Hz ⁵⁾
Connection type:	Connector M12, 4-pin
Protection class:	II ⁶⁾
Circuit protection:	A B D ⁷⁾ ⁸⁾ ⁹⁾
Weight:	10 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-25 C ... 55 C
Ambient temperature, storage:	-25 C ... 70 C
Polarisation filter:
Items supplied:	snap-ring and M18 nut
Special device:	-
Angle of dispersion:	1.5
¹⁾ Limit values, operation in short-circuit protected network max. 8 A ²⁾ May not exceed or fall short of V_S ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ With light/dark ratio 1:1 ⁶⁾ Reference voltage 50 V DC ⁷⁾ A = V_S connections reverse-polarity protected ⁸⁾ B = inputs and output reverse-polarity protected ⁹⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products