Add To Cart
share
Sick WL12-2P430 Overview
Reflex Photoelectric Switch WL12-2P430 complementary PNP outputs,4 pin M12-plug
Sick WL12-2P430 Description
- Red light; consequently, fast alignment is possible
- Insensitive to external light sources, i.e., increased operating reliability
- M12 plug rotatable by 90, or 2 m/3 m cable
- Adjustable sensitivity; optimum adaptation to application
| Product features | |
| Sensing range min ... max: | 0 m ... 5 m, 0 m ... 7 m |
| Light source: | LED |
| Type of light: | Red light |
| Light spot diameter: | 80 mm at 3 m distance |
| Laser: | Red light |
| Sensing range max.: | 0 m ... 5 m, 0 m ... 7 m |
| Relating to: | Reflector PL80A |
| Sensitivity adjustment: | Potentiometer |
| Technical data | |
| Design: | cuboid |
| Dimensions (W x H x D): | 15 mm x 49 mm x 41.5 mm |
| Supply voltage min ... max: | DC 10 ... 30 V 1) |
| Ripple: | ≤ 5 Vpp |
| Power consumption: | ≤ 30 mA |
| Switching output: | PNP antivalent |
| Output current max.: | ≤ 100 mA |
| Response time: | ≤ 330 s |
| Switching frequency: | 1,500 Hz |
| Connection type: | Connector, M12, 4-pin |
| Circuit protection: | VS connections reverse-polarity protected / Output Q and Q not short-circuit protected / Interference suppression |
| Enclosure rating: | IP 69K |
| Ambient operation temperature, min ... max: | -40 C ... +60 C |
| Ambient storage temperature, min ... max: | -40 C ... +75 C |
| Weight: | ca. 120 g |
| Housing material: | die-cast zinc |
| Series: | W12-2 |
| 1) Limit values | |
Contact Us
Hot Products