Add To Cart
share
Sick WL12G-P510S10 Overview
Reflex-Photoelectric Switch WL12G-P510S10 Switching output "Low" at position T, PNP-ouput, light switching
Sick WL12G-P510S10 Description
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Product features | |
| Sensing range min ... max: | 0 m ... 2 m, 0 m ... 3 m |
| Light source: | LED |
| Type of light: | Infrared light |
| Light spot diameter: | 8 x 13 mm at 200 mm distance |
| Laser: | Infrared light |
| Sensing range max.: | 0 m ... 2 m, 0 m ... 3 m |
| Relating to: | Reflector PL80A |
| Technical data | |
| Design: | cuboid |
| Dimensions (W x H x D): | 15 mm x 49 mm x 41.5 mm |
| Supply voltage min ... max: | DC 10 ... 30 V 1) |
| Ripple: | ≤ 5 Vpp |
| Power consumption: | ≤ 65 mA |
| Switching output: | PNP antivalent |
| Switching mode: | light switching |
| Output current max.: | 100 mA |
| Response time: | ≤ 0.5 ms |
| Switching frequency: | 1,000 Hz |
| Connection type: | Connector, M12, 5-pin |
| Circuit protection: | VS connections reverse-polarity protected / Output Q and Q not short-circuit protected / Interference suppression |
| Enclosure rating: | IP 67 |
| Ambient operation temperature, min ... max: | -25 C ... +60 C |
| Ambient storage temperature, min ... max: | -40 C ... +75 C |
| Weight: | ca. 120 g |
| Housing material: | Zinc diecast |
| Series: | W12-2 |
| 1) Limit values | |
Contact Us
Hot Products