Sick WFL2-40B416 (6036821)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick WFL2-40B416 (6036821)

Add To Cart

WFL2-40B416 Laser Fork-Sensor Fork width/depth 2/40 mm, Output npn/pnp, M8 plug, 4-pin, teach-in

Your benefits

A highly precise laser beam ensures consistent measurement accuracy along the entire measuring range and reliable detection of the smallest objects
A visible laser light spot enables easy alignment and fast adjustment
Reliable and simple setting via teach-in ensures high process reliability
A wide range of different fork sizes increases installation flexibility
The aluminum housing meets all requirements for use in harsh industrial conditions

Features
Functional principle:	Optical detection principle
Fork width:	2 mm
Fork depth:	42 mm
MDO ¹⁾:	0.05 mm
Label detection:	-
Light source:	Laser, Class 1, 670 nm
Adjustment:	Teach-in
Switching mode:	Light/darkswitching, selectable via button
¹⁾ Minimum detectable object
Mechanics/electronics
Supply voltage Vs ¹⁾:	DC 10 V ... 30 V
Residual ripple ²⁾:	< 10 %
Power consumption ³⁾:	40 mA
Switching frequency ⁴⁾:	10 kHz
Response time ⁵⁾:	100 s
Stability of response time:	20 s
Switching output:	PNP: HIGH = VS-≤ 2 V / LOWapprox. 0 V NPN: HIGH = approx.VS/ LOW ≤ 2 V
Switching output:	PNP/NPN
Output current Imax.:	100 mA
Initialization time:	100 ms
Connection type:	Connector M8, 4-pin
Ambient light safety:	Sunlight: 10,000
Protection class ⁶⁾:	III
Circuit protection:	VS connections reverse-polarity protected Output Q short-circuit protected Interference suppression
Enclosure rating:	IP 65
Weight:	Ca. 36 g ... 160 g ⁷⁾
Housing material:	Aluminum
¹⁾ Limit values, reverse-polarity protected, operation in short-circuit protected network, max. 8 A ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Without load ⁴⁾ With light/dark ratio 1:1 ⁵⁾ Signal transit time with resistive load ⁶⁾ Reference voltage DC 50 V ⁷⁾ Depending on fork width
Ambient data
Ambient temperature ¹⁾:	Operation: -20 ... 50 C Storage: -30 ... 80 C
Shock load:	according to IEC 60068
¹⁾ Do not bend below 0 C

Hot Products

Reviews(0)

Write a Review

Hot Products