Sick WF2-B4210 (6012062)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick WF2-B4210 (6012062)

Add To Cart

Your benefits

An integrated housing that combines the sender and receiver keeps installation time to a minimum
A wide variety of fork widths, depths and different detection technologies (IR LED, red LED, laser and ultrasonic) meet any need
A highly visible light spot in the laser and red light versions make these sensors easy to adjust
High switching frequencies ensure reliable performance
High immunity to ambient light provides reliable detection
Aluminum housing meets requirements for use in general industrial conditions

Features
Functional principle:	Optical detection principle
Fork width:	2 mm
Fork depth:	60 mm
Label detection:
Light source:	LED, infrared
Type of light:	Infrared
Switching mode:	Light/darkswitching, adjustable via reverse polarity

Mechanics/electronics
Supply voltage Vs ¹⁾:	10 V ... 30 V
Residual ripple ²⁾:	< 10 %
Power consumption ³⁾:	40 mA
Switching frequency ⁴⁾:	10 kHz
Response time ⁵⁾:	30 s
Switching output:	PNP: HIGH = VS-≤ 2 V / LOWapprox. 0 V NPN: HIGH = approx.VS/ LOW ≤ 2 V
Switching output:	PNP/NPN (Push/ Pull)
Output current Imax.:	100 mA
Connection type:	Connector M8, 4-pin
Ambient light safety:	Incandescent lamp: ≤ 3,000 klx
Protection class ⁶⁾:	III
Circuit protection:	Output Q short-circuit protected Interference suppression
Enclosure rating:	IP 65
Weight:	Ca. 36 g ... 160 g ⁷⁾
Housing material:	Aluminum
Teach-in:	0
¹⁾ Limit values, reverse-polarity protected ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Without load ⁴⁾ With light/dark ratio 1:1, no time delay ⁵⁾ Signal transit time with resistive load ⁶⁾ Reference voltage DC 50 V ⁷⁾ Depending on fork width
Ambient data
Ambient temperature ¹⁾:	Operation: -20 ... 60 C Storage: -20 ... 80 C
Shock load:	according to IEC 60068
¹⁾ Do not bend below 0 C

Hot Products

Reviews(0)

Write a Review

Hot Products