Add To Cart
share
Sick VTE18-4P8240V Overview
VTE18-4P8240V Photoelectric proximity switch energetic
Sick VTE18-4P8240V Description
- Photoelectric proximity sensor in M18 cylindrical stainless steel housing
- Energetic proximity sensor with two scanning distances of 400 mm or 800 mm
- Resistant to all common cleaning agents and certified by independent institutes
- Large operating temperature range and IP 69K
- Standardized design enables simple assembly and alignment and simple replacement of the device
- Individual devices for various scanning distances
- Suitable for use in hygienic areas
- Encapsulated casting and enhanced reliable operating range provides maximum sturdiness and impermeability
Your benefits
| Features | |
| Sensing range max.: | 0 mm ... 900 mm 1) |
| Sensing range: | 5 mm ... 800 mm |
| Housing desig (light emission): | Cylindrical, straight, straight |
| Light source: | LED 2) |
| Type of light: | Infrared light |
| Wave length: | 880 nm |
| Adjustment: | adjustable |
| Housing length: | 83 mm |
| Thread diameter (housing): | M18 x 1 |
| Adjustment of operating distance: | Manual, via Touch-Teach-in |
| Sensor/detection principle: | Photoelectric proximity sensor, energetic |
| Light spot (distance): | 100 mm (800 mm) |
| Optical axis: | axial |
| 1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C With correct mounted IP 69K connector | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 IP 68 IP 69K |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | ≤ 10 % 2) |
| Power consumption: | ≤ 35 mA 3) |
| Switching output: | PNP, light/dark-switching, Selectable via L/D control wire, open collector |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 1 ms 4) |
| Switching frequency: | 500 Hz 5) |
| Connection type: | Connector M12, 4-pin 6) |
| Cable material: | PPS (Griamid) |
| Protection class: | III |
| Circuit protection: | A B C D 7) 8) 9) 10) |
| Weight: | 120 g |
| Housing material: | Stainless steel V4A 1.4404, 316L |
| Optics material: | Plan, PPS (Grilamid) |
| Ambient temperature, operation: | -25 C ... 80 C |
| Ambient temperature, storage: | -40 C ... 80 C |
| Signal voltage PNP HIGH / LOW: | approx. VS - 2.0 V / 0 V |
| Angle of dispersion: | 4.5 |
| 1) Limit values 2) May not exceed or fall short of VS 3) Without load, at VS 30 V DC 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) With gold plated contact pins, PPS with FDA certificate 7) A = VS connections reverse-polarity protected 8) B = interference suppression 9) C = outputs overcurrent and short-circuit protected 10) D = inputs and output reverse-polarity protected | |
Contact Us
Hot Products