Add To Cart
share
Sick VL180-2N41136 Overview
VL180-2N41136 Photoelectric reflex switch with polarising filter, scanning range 6m (PL80A), NPN,L.On/D.On output, cable 2m,optic axis axial
Sick VL180-2N41136 Description
- Photoelectric retro-reflective sensor with polarizing filter for reliable detection of highly-reflective objects
- Visible red light with homogenous and extremely bright light spot makes for easier alignment
- 2 LEDs with 360 display visibility together with sensitivity control for quick commissioning
- Standardized connection system with cable or M12 device connector
- Compact M18 metal or plastic housing
- Short reaction time enables reliable detection including in dynamic processes and with high-speed objects
- High operating reserves and access to new solutions due to large scanning distance and homogeneous system specifications for all variants
- The answer to economic challenges thanks to simple mounting, standardized connection technology and universal use.
- Convenient, fast, compatible thanks to optimum visibility emitter LED, two status indicator LEDs with 360 visibility, very short housing.
- Compatible and economical due to standardized M18 housing and interfaces
- Visible red light plus sensitivity control enables quick and easy commissioning and adjustment
- 2 indicator LEDs with 360 all-round visibility for easily-recognizable reporting about operating status
Your benefits
| Features | |
| Sensing range max.: | 0.05 m ... 7 m 1) |
| Sensing range: | 0.05 m ... 6 m 2) |
| Housing desig (light emission): | Cylindrical, straight, straight |
| Light source: | LED 3) |
| Type of light: | visible red light |
| Wave length: | 645 nm |
| Sensitivity adjustment: | Potentiometer, 270 |
| Housing length: | 62.9 mm |
| Thread diameter (housing): | M18 x 1 |
| Sensor/detection principle: | Photoelectric retro-reflective sensor |
| Light spot (distance): | 400 mm (6 m) |
| Optical axis: | axial |
| 1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 10 % 2) |
| Power consumption: | 30 3) |
| Switching output: | NPN, light/dark-switching, Selectable via L/D control wire, open collector 4) |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 0.5 ms 5) |
| Switching frequency: | 1,000 Hz 6) |
| Connection type: | Cable, 4-wire, 2 m 7) |
| Cable material: | PVC |
| Conductor cross-section: | 0.18 mm2 |
| Cable diameter: | 3.8 mm |
| Protection class: | III |
| Circuit protection: | A B D 8) 9) 10) |
| Weight: | 62 g |
| Housing material: | PBT and PC |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 55 C |
| Ambient temperature, storage: | -40 C ... 70 C |
| Polarisation filter: | ![]() |
| Items supplied: | fastening nuts (2 x), Reflector P250 |
| Signal voltage NPN HIGH / LOW: | approx. VS / < 1.8 V |
| Output state-LED: | - |
| Special device: | - |
| Angle of dispersion: | Ca. 4.5 |
| 1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Control wire open: light-switching L.ON 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) Do not bend below 0 C 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products