Sick THTE-1AAT11506MZ (6047633)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick THTE-1AAT11506MZ (6047633)

Add To Cart

Your benefits

The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks
Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design
Rugged: Connection housing is easily cleaned and splash water proof
Quick and safe installation
Very good long-term stability, accuracy and linearity
Quick response time
Optimal solutions for individual requirements due to versatile configurability

Features
Measurement range:	-50 C ... 150 C
Sensor element:	Pt100
Signal output and maximum ohmic load RA:	4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm])

Performance
Accuracy of sensor element:	class A according to IEC 60751
Transmitter accuracy:	≤ 0.2 % of span
Transmitter linearity:	≤ 0.1 % of span
Response time:	Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s ¹⁾
¹⁾ Depending on sensor configuration, according to IEC 60751
Mechanics/electronics
Process connection:	tri-clamp1'', 1 1''
Insertion length/diameter of probe:	150 mm / 6 mm
Housing material:	Stainless steel 1.4571 (316Ti)
Wetted parts:	stainless steel 1.4435 (316L), Ra ≤ 0.8 m
Electrical connection/enclosure rating ¹⁾:	Round connector M12 x 1, 4-pin / IP 68 and IP 69K
Electrical safety:	dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M
Supply voltage:	10 V DC ... 35 V DC
Protection class III:
CE-conformity:	2004/108/EC, EN 61326-2-3
Pressure resistance:	max. 16 bar at room temperature
Maximum power consumption:	ca. 30 mA
¹⁾ Enclosure rating IP per IEC 60529. The enclosure rating classes specified only apply while the pressure transmitter is connected with female connectors that provide the corresponding enclosure rating.
Ambient data
Ambient temperature:	-40 C ... 85 C
Storage and transport temperature:	-40 C ... 85 C
Vibration resistance according to IEC 60751:	3 g
Shock resistance:	according to IEC 60751
Relative humidity:	≤ 95 %

Hot Products

Reviews(0)

Write a Review

Hot Products