Add To Cart
share
Sick KTL5W-2P23 Overview
Contrast Scanner KTL5W-P23 PNP switching output for fiber optic cable, with time delay, 5 pin plug M12 without analoque output
Sick KTL5W-2P23 Description
- Various heat-resistant fiber-optic cable models are available
- Various teach-in methods, including potentiometer
- Analog output
- Switching frequency of 10 kHz
- Reliable contrast detection
- Flexible integration into machines due to minimal space requirements and various fiber-optic cable versions
- Durable, glass fiber-optic cables
- Reliable operation in adverse environmental conditions, such as extreme temperatures and moisture
- Resistant to aggressive cleaning agents
- Compact design fits in applications with limited space
Your benefits
| Features | |
| Dimensions (L x W x H): | 80 mm x 30.4 mm x 53 mm |
| Sensing distance: | Dependent on the fiber-optic cablethe fiber-optic cable |
| Light source 1) 2): | LED red, green, blue |
| Light spot size: | (Dependent on the fiber-optic cable) |
| Adjustment: | Dynamic teach-in |
| Switching mode: | Light/dark switching |
| 1) Average service life of 100,000 h at TA = +25 C 2) Wave length: 470 nm, 525 nm,640 nm | |
| Mechanics/electronics | |
| Supply voltage Vs 1): | DC 10 V ... 30 V |
| Residual ripple 2): | ≤ 5 Vpp |
| Power consumption 3): | < 80 mA |
| Switching frequency 4): | 10 kHz |
| Response time 5): | 50 s |
| Switching output: | PNP: HIGH = VS-≤ 2 V / LOWapprox. 0 V |
| Switching output: | PNP |
| Input, teach-in (ET): | PNP: Teach: U= 10 V... < UV Run: U < 2 V |
| Input, light/dark (L/D): | Dark: U > 10V ...< UV , PNP: light: U = 0 V |
| Retention time (ET): | 25 ms, non-volatile memory |
| Time delay: | 20 ms |
| Electrical connection: | Connector M12, 5-pin |
| Protection class 6): | II |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Enclosure rating: | IP 67 |
| Weight: | Ca. 400 g |
| Housing material: | Zinc diecast |
| Output current Imax.: | 100 mA |
| 1) Limit values: operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) With light/dark ratio 1:1 5) Signal transit time with resistive load 6) Reference voltage DC 50 V | |
| Ambient data | |
| Ambient temperature: | Operation: -10 ... 55 C Storage: -25 ... 75 C |
| Shock load: | according to IEC 60068 |
Contact Us
Hot Products