Add To Cart
share
Sick FFUS15-1G1IO Overview
ULTRASONIC FLOW METER
Sick FFUS15-1G1IO Description
- Flow sensor for conductive and non-conductive liquids
- Compact design with no moving parts
- Process temperature up to 80 C, process pressure up to 10 bar
- High chemical resistance due to seal-free sensor design
- Large display with membrane keyboard
- Integrated teaching tube detection
- Reduced maintenance costs
- Adjustable measuring ranges reduces the number of variants
- Ability to be used with conductive and non-conductive liquids reduces variants and lowers storage costs
- Straight measuring tube reduces pressure loss, thus reducing energy costs
- Sensor without seals increases process reliability and availability
- Flexible measurement system for all industries
Your benefits
| Features | |
| Medium: | Fluids |
| Nominal width measuring tube: | NW 15 |
| Process temperature: | 0 C ... 80 C |
| Process pressure: | max. 10 bar |
| EHEDG approval: | ![]() |
| Performance | |
| Minimim flow: | 0.9 l/min |
| Maximumflow: | 36 l/min |
| Inlet zone: | 30 cm |
| Outlet zone: | 5 cm |
| Conductivity: | no limitation |
| Accuracy of sensor element: | 2 % (of final value) |
| Repeatability: | ≤ 0.5 % |
| Resolution: | 0.006 l/min |
| Mechanical data | |
| Process connection: | G 3/4 |
| Wetted parts: | PSU |
| Housing material: | PSU |
| Weight: | 350 g |
| Electrical data | |
| Supply voltage: | 18 V DC ... 30 V DC 1) |
| Residual ripple: | ≤ 5 Vpp 2) |
| Power consumption: | ≤ 180 mA 3) |
| Initialization time: | ≤ 5 s |
| Protection class: | III |
| Connection type: | M12x1, 5-pin |
| Output signal: | Analog output: 4 mA ... 20 mA, 0 mA 20 mA current flow 1 pulse/status output: PNP transistor output for flow rate meter, empty pipe detection, flow monitoring 4) |
| Impuls/frequency output: | 0kHz ... 10 kHz |
| Puls width: | ≤ 1 s |
| Signal voltage HIGH: | Vs - 2 V |
| Signal voltage LOW: | ≤ 2 V |
| Output current: | < 100 mA |
| Inductive load: | 1 H |
| Capacitive load: | 100 nF |
| Response time: | filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s 5) |
| Enclosure rating: | IP 67 |
| Output load: | < 500 Ohm |
| Lower signal level: | 3.8 mA ... 4 mA |
| Upper signal level: | 20 mA ... 20.5 mA |
| 1) 4) All connections are polarity protected. All outputs are overload and short-circuit protected. 2) May not exceed or fall short of VS tolerances 3) Without load 5) Analog output and display | |
| Ambient data | |
| Ambient temperature, operation: | 0 C ... 60 C |
| Ambient temperature, storage: | -20 C ... 70 C |
Contact Us
Hot Products