SICK WSE4-3N3130 (1028166)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WSE4-3N3130 (1028166)

Add To Cart

NPN, light switching, cable 100 mm with plug M8, 3 pin

Your benefits

The PinPoint LED's sharply defined, intensive light spot makes alignment of the WSE4-3 fast and simple
Low-cost machine integration as, unlike other types, the W4-3 can be integrated optimally in cramped installation conditions
M3 threaded metal sockets for robust mounting guaranteeing a long service life and less downtime.

Features
Dimensions (W x H x D)::	16 mm x 39.5 mm x 12 mm
Sensing range max.:	0 m ... 6 m
Sensing range:	0 m ... 5.5 m
Housing desig (light emission):	Flat
Light source:	PinPoint LED ¹⁾
Type of light:	visible red light
Wave length:	650 nm
Adjustment:	no/fix
Sensitivity adjustment:	No/fix
Sensor/detection principle:	Through-beam photoelectric sensor
Light spot (distance):	210 mm (2 m)
¹⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67 IP 66
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	< 5 Vpp ²⁾
Power consumption:	20 20 20 ³⁾ ⁴⁾ ⁵⁾
Switching output:	NPN, light switching
Output current Imax.:	100
Response time:	< 0.5 ms ⁶⁾
Switching frequency:	1,000 With light/dark ratio 1:1
Connection type:	Cable with plug, M8, 3-pin 100 mm ⁷⁾
Cable material:	PVC
Conductor cross-section:	0.14 mm2
Cable diameter:	3.4 mm
Protection class:	III
Circuit protection:	A C D ⁸⁾ ⁹⁾ ¹⁰⁾
Weight:	60 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-40 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Test input sender off:	TE to 0 V
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Sender ⁴⁾ ⁵⁾ Receiver ⁶⁾ Signal transit time with resistive load ⁷⁾ Do not bend below 0 C ⁸⁾ A = VS connections reverse-polarity protected ⁹⁾ C = interference suppression ¹⁰⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products