SICK WSE11-2P2430 (1041394)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WSE11-2P2430 (1041394)

Add To Cart

Through beam photoelectric switch WSE11-2P2430 PNP, complementary outputs, plug M12, 4 pin

Through-beam photoelectric sensor
Robust sensors for industrial use
PinPoint technology is precise and fast-reacting for optimal detection of a very wide range of objects
Space-saving plastic housing in chemically, thermally or mechanically-resistant designs
Dovetail mounting - mounting holes and oblong holes for a very wide range of securing options
All-round, easily visible status LEDs
Operating distance up to 20 m

Your benefits

Reliable universal detection of objects, large scanning ranges and high reserve levels thanks to superior OES2 chip technology
Effective suppression of optical interference factors from the industrial environment
PinPoint provides bright, small, precise light spots and enables simple, fast sensor alignment, first-class switching characteristics, a high standard of detection quality and hence reliable detection of objects
The WSE11-2 is designed for industrial use: its robust housing, resistance to high-pressure cleaner, cleaning agents and disinfectant ensure less downtime
User-friendly sensors, fast mounting and installation. Simple sensor diagnosis using easily visible status LEDs. No need for specialist personnel or expensive training.
Easily installed with SICK accessories

Features
Dimensions (W x H x D)::	15.6 mm x 48.5 mm x 42 mm
Sensing range max.:	0 m ... 20 m
Sensing range:	0 m ... 15 m
Light source:	LED
Type of light:	visible red light
Wave length:	633 nm
Adjustment:	no/fix
Sensitivity adjustment:	No/fix
Sensor/detection principle:	Through-beam photoelectric sensor
Light spot (distance):	220 mm (15 m)

Mechanics/electronics
Enclosure rating:	IP 66 IP 67 IP 69K
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	≤ 5 Vpp ²⁾
Switching output:	PNP, light/dark-switching, Complementary
Output current Imax.:	100 mA
Response time:	≤ 2.5 ms ³⁾
Switching frequency:	200 Hz with light/dark ratio 1:1
Connection type:	Connector M12, 4-pin
Protection class:	II
Circuit protection:	A C D ⁴⁾ ⁵⁾ ⁶⁾
Weight:	120 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-30 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Test input sender off:	TE to 0 V
Signal voltage PNP HIGH / LOW:	Uv - 2.5 V / approx. 0 V
Power consumption, sender:	≤ 25 mA ⁷⁾
Power consumption, receiver:	≤ 20 mA ⁸⁾
Angle of dispersion:	Ca. 1.5
¹⁾ Limit values, operation in short-circuit protected network max. 8 A ²⁾ ³⁾ Signal transit time with resistive load ⁴⁾ A = VS connections reverse-polarity protected ⁵⁾ C = interference suppression ⁶⁾ D = outputs overcurrent and short-circuit protected ⁷⁾ ⁸⁾ Without load

Hot Products

Reviews(0)

Write a Review

Hot Products