Add To Cart
share
SICK WL9L-N330 Overview
Photoelectric-reflex switch WL9L-N330 range 8 m, Laser red-light NPN, plug M8, 4 pin, Fokus 100 mm
SICK WL9L-N330 Description
- Advanced laser technology with great performance
- Constant laser power and compliance with laser class 2
- Photoelectric sensor with teach-in pushbutton with large sensing ranges up to 12 m
- UL, CE, CDRH approval
- High reliability with maximum eye protection due to laser control (laser class 2)
- Small laser light spot reliably detects the smallest objects
- Laser is approved for worldwide usage
- Designed for quick and easy installation with SICK accessories
Your benefits
| Features | |
| Dimensions (W x H x D):: | 12 mm x 40 mm x 22 mm |
| Sensing range max.: | 0.1 m ... 12 m 1) |
| Sensing range: | 0.1 m ... 8 m 2) |
| Housing desig (light emission): | Cuboid |
| Light source: | Laser 3) |
| Type of light: | visible red light |
| Sensitivity adjustment: | Teach-in button |
| Laser class: | 2 |
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics |
| Light spot (distance): | 1 mm (500 mm) |
| 1) 2) PL80A 3) Average service life 50,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | ≤ 5 Vpp 2) |
| Power consumption: | < 35 mA |
| Switching output: | NPN, light/dark-switching |
| Output current Imax.: | < 100 mA |
| Response time: | < 0.6 ms 3) |
| Switching frequency: | 1,000 Hz 4) |
| Connection type: | Connector M8, 4-pin |
| Protection class: | III 5) |
| Circuit protection: | A B C 6) 7) 8) |
| Weight: | 20 g |
| Housing material: | ABS |
| Ambient temperature, operation: | -10 C ... 50 C |
| Ambient temperature, storage: | -25 C ... 70 C |
| Polarisation filter: | ![]() |
| Signal voltage PNP HIGH / LOW: | approx. VS - 2.0 V / 0 V |
| 1) Limit values 2) May not exceed or fall short of VS 3) Signal transit time with resistive load 4) 5) Reference voltage 50 V DC 6) A = VS connections reverse-polarity protected 7) B = inputs and output reverse-polarity protected 8) C = interference suppression | |
Contact Us
Hot Products