SICK WL24-2B333 (1017878)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WL24-2B333 (1017878)

Add To Cart

Reflex Photoelectric Switch WL24-2B333 PNP/NPN, Light/Dark switching selector, Plug, cubic, 3 pin, Test input

Metal housing that has been IP 69k tested
Switch selectable PNP or NPN output
Switch selectable Light or Dark operating mode
Variants with DC voltage and universal AC/DC voltage with UL approval
Optional test input, adjustable ON and OFF time delays, alarm output and front screen heating
M12 or terminal chamber connection: 90 rotatable

Your benefits

Metal housing that has been IP 69K tested provides reliability and a long service life
High operating reserve at a long sensing range reduces downtime
Alarm output signals marginal operation to provide an early warning
Test input provides diagnostic feedback for example misalignment
Selectable output type, operating mode, and adjustable time delays makes integration easier and reduce the number of devices needed
Ensuring reliable operation in environments with temperatures fluctuation due to standard or high-power front lens heating (prevention and reduction of condensation water on the front lens)
Variants with DC voltage and universal AC/DC voltage provide installation flexibility
Red light provides easy alignment, which saves time

Features
Dimensions (W x H x D)::	27 mm x 87.5 mm x 65 mm
Sensing range max.:	0 m ... 22 m ¹⁾
Sensing range:	0 mm ... 15 mm ²⁾
Housing desig (light emission):	Cuboid
Light source:	LED ³⁾
Type of light:	visible red light
Sensitivity adjustment:	Sensitivity adjustment
Sensor/detection principle:	Photoelectric retro-reflective sensor
Light spot (distance):	250 mm (15 m)
¹⁾ ²⁾ PL80A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 69K
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	< 5 Vpp ²⁾
Power consumption:	≤ 50 mA ³⁾
Switching output:	NPN, light/dark-switching, selectable via NPN/PNP selector PNP, light/dark-switching, selectable via light/dark selector
Output current Imax.:	100 mA
Response time:	≤ 500 s ⁴⁾
Switching frequency:	1,000 Hz ⁵⁾
Connection type:	Cubic plug, 3-pin ⁶⁾
Protection class:	II ⁷⁾
Circuit protection:	A C D ⁸⁾ ⁹⁾ ¹⁰⁾
Weight:	330 g
Housing material:	Zinc diecast
Optics material:	PMMA
Ambient temperature, operation:	-40 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Polarisation filter:
Special device:	-
Front screen heating:	-
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ With light/dark ratio 1:1 ⁶⁾ Connection rotable by 90 ⁷⁾ Reference voltage 50 V DC ⁸⁾ A = V_S connections reverse-polarity protected ⁹⁾ C = interference suppression ¹⁰⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products