Add To Cart
share
SICK WL150-P122 Overview
Reflex Photoelectric Switch WL150-P122 DC 10...30 V, PNP, cable 2 m, for detection of transparent objects
SICK WL150-P122 Description
- Standard optics
- Polfilter
- Sensing distance of up to 2.4 m
- Version for detection of transparent objects
- Sensitivity control on device via potentiometer
- Light/dark switching selectable via control wire
- Suitable for Diamond Grade reflective tape
- Polarizing filters prevent false readings on reflective surfaces, ensuring reliable object detection
- Reliable detection of transparent objects
- Reliable detection of objects moving at fast speeds
- Highly visible red light for easy alignment
Your benefits
| Features | |
| Dimensions (W x H x D):: | 10 mm x 28 mm x 17.5 mm |
| Sensing range max.: | 0.01 m ... 0.7 m 1) |
| Sensing range: | 0.01 m ... 0.6 m 2) |
| Housing desig (light emission): | Cuboid |
| Light source: | LED 3) |
| Type of light: | visible red light |
| Sensitivity adjustment: | Potentiometer, 270 |
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics |
| 1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 10 % 2) |
| Power consumption: | ≤ 30 mA 3) |
| Switching output: | PNP, light/dark-switching, control cable, open collector |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 0.5 ms 4) |
| Switching frequency: | 1,000 Hz 5) |
| Connection type: | Cable, 4-wire, 2 m 6) |
| Cable material: | PVC |
| Conductor cross-section: | 0.18 mm2 |
| Protection class: | II |
| Circuit protection: | A B C D 7) 8) 9) 10) |
| Weight: | 44 g |
| Housing material: | ABS |
| Optics material: | PC |
| Ambient temperature, operation: | -25 C ... 55 C |
| Ambient temperature, storage: | -40 C ... 75 C |
| Polarisation filter: | ![]() |
| Items supplied: | BEF-W150-A mounting bracket, Reflector PL20A |
| Attenuation along light beam: | > 20 % |
| Special Design: | for transparent objects |
| Angle of dispersion: | Ca. 7.5 |
| AS-Interface-Chip: | - |
| Attenuation difference of object: | > 7.5 % |
| 1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) C = interference suppression 10) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products