SICK WL14-2K430 (1028427)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WL14-2K430 (1028427)

Add To Cart

Photoelectric Reflex Switch WL14-2K430 PNP, complementary outputs M12-plug, PIN4=Q/ Pin2=Q

Your benefits

Universal application possibilities and fast installation due to visible red light
Reliable object detection with precise background suppression
Comfortable and fast scanning distance setting due to 4-speed potentiometer
No interference from ambient light or devices mounted opposite one another
High availability in the field

Features
Dimensions (W x H x D)::	17.6 mm x 75.5 mm x 33.5 mm
Sensing range max.:	0.15 m ... 6 m ¹⁾
Sensing range:	0.15 m ... 4 m ²⁾
Housing desig (light emission):	Slim
Light source:	LED ³⁾
Type of light:	visible red light
Wave length:	645 nm
Adjustment:	no/fix
Sensitivity adjustment:	No/fix
Sensor/detection principle:	Photoelectric retro-reflective sensor, Standard optics
Light spot (distance):	140 mm (4 m)
¹⁾ ²⁾ PL80A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	5 Vpp ²⁾
Power consumption:	≤ 35 mA ³⁾
Switching output:	PNP, light/dark-switching, Complementary
Output current Imax.:	≤ 100 mA
Response time:	≤ 2.5 ms ⁴⁾
Switching frequency:	200 Hz with light/dark ratio 1:1
Connection type:	Connector M12, 4-pin
Number of cores:	4
Circuit protection:	A C D ⁵⁾ ⁶⁾ ⁷⁾
Weight:	40 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-25 C ... 60 C
Ambient temperature, storage:	-40 C ... 70 C
Polarisation filter:
Voltage supply-LED:
Output state-LED:
Angle of dispersion:	2
¹⁾ Limit values, operation in short-circuit protected network max. 8 A ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ A = VS connections reverse-polarity protected ⁶⁾ C = interference suppression ⁷⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products