Add To Cart
share
SICK VL12-2N132 Overview
Photoelectric reflex switch VL12-2N132
SICK VL12-2N132 Description
- Sensing distance up to 2.8 m (with PL80A reflector)
- Switching reliability with highly-reflective objects
- Adjustable light or dark switching at control input
- Operating reserve display
- M12 device connector, 4-pin or 2 m connection line
- M12 metal housing with an IP 67 enclosure rating
- Economical solution for reliably detecting reflective objects up to 2.8 m (with PL80A reflector)
- Standard M12 miniature housing saves installation space on the machine
- Simple design and time-saving installation due to a standard M12 housing
- Polarizing filter prevents false readings on reflective surfaces, reducing downtime
- Fast and simple alignment to the reflector due to visible red light
- Fast response times ensure reliable detection of objects at high speeds, increasing machine throughput
- Tough metal housing provides a long service life, reducing maintenance time and costs
Your benefits
| Features | |
| Sensing range max.: | 0.03 m ... 2.8 m 1) |
| Sensing range: | 0.03 m ... 2.3 m 2) |
| Housing desig (light emission): | Cylindrical, straight |
| Light source: | LED 3) |
| Type of light: | visible red light |
| Wave length: | 660 nm |
| Housing length: | 55 mm |
| Thread diameter (housing): | M12 x 1 |
| Sensor/detection principle: | Photoelectric retro-reflective sensor |
| Light spot (distance): | 80 mm (2 m) |
| 1) 2) PL80A 3) Average service life of 100,000 h at TA = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V 1) |
| Residual ripple: | ≤ 10 % 2) |
| Power consumption: | ≤ 20 mA 3) |
| Switching output: | NPN, light/dark-switching, Selectable via L/D control wire |
| Output current Imax.: | ≤ 100 mA 4) |
| Response time: | ≤ 1.25 ms 5) |
| Switching frequency: | 400 Hz 6) |
| Connection type: | Cable, 4-wire, 2 m 7) |
| Cable material: | PVC |
| Conductor cross-section: | 0.14 mm2 |
| Cable diameter: | 3.75 mm |
| Protection class: | III |
| Circuit protection: | A B C D 8) 9) 10) 11) |
| Weight: | 54 g |
| Housing material: | Nickel-plated brass/PA |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 70 C |
| Ambient temperature, storage: | -25 C ... 70 C |
| Polarisation filter: | ![]() |
| Special device: | - |
| Angle of dispersion: | 2.3 |
| 1) Limit values 2) May not exceed or fall short of VS 3) 4) Without load 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) Do not bend below 0 C 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) C = interference suppression 11) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products