Home / news / How Does the Mid-infrared MEMS /

How Does the Gas Sensor work?

28 Feb 2013

By Jenifer

Spectroscopy system specifically designed for measuring hydrocarbon gases.


The GasSensor integrates VTT’s tunable Fabry-Perot filter, a lead-selenide (PbSe) detector and a “microglow” light source packaged together into the ultra-compact device.

Jarkko Antila, senior scientist and VTT’s product line manager, Microspectrometer Technologies, says, “A common problem with the traditional NDIR sensors (non-dispersive infrared) is their cross sensitivity to other hydrocarbons and also to water vapor.

"Our new GasSensor overcomes this by utilizing full spectral information. Its specificity can be improved by a factor of five compared to our current range of gas sensing products."

Selective sensitivity

weigh 95g.

Another problem with conventional sensors is their relatively unreliable long term stability, which can cause false alarms in their intended safety and security applications, such ads in factories and chemical refineries.

VTT Technical Research Centre of Finland has developed a series of new mid-infrared spectrometers, which have been integrated into compact gas sensors, branded as “GasSensors”.

The spectrometers are based on MEMS-tunable Fabry-Perot filter spectral sensors. The first demonstrator sensors, which were shown recently at BiOS and Photonics West inSan Francisco, are now available for detecting and analyzing low levels of hydrocarbon gases in the spectrum between 3 and 3.7 microns

Gases such as methane and other short-chain alkanes, as well as ethylene, ethanol and propylene can be precisely analyzed with the sensors, which measure just 77x38x25 mm and


Highlighted features of the gas sensor include: a compact, hand-held design, USB2.0 connectivity (also for power supply); simple reconfiguration for analyzing both liquid or solid samples, a wavelength range from 3000-3700 nm, a spectral resolution of 50-60 nm and an optical path length up to 1.5 cm.

The GasSensor has a power consumption under 2 W and runs on LabView software.

VTT, a not-for-profit organization, is a part of the Finnish innovation system under the management ofFinland’s Ministry of Employment and the Economy. The organization is the largest multi-technological applied research organization in Northern Europe.