Add To Cart
share
Sick WSE8-N1131V Description
- Rugged IP 69K stainless steel housing 1.4404/316L
- Front screen made of high-performance plastic PPSU that is resistant to heat and chemicals
- Potentiometer is made of mechanically stable high-performance PEEK plastic
- Constructed from FDA-approved materials
- Well-defined, highly visible light spot
- M3 threaded mounting holes and stainless steel mounting bracket (1.4301/304) included with delivery
- High reliability due to an IP 69K stainless steel housing, which withstands aggressive cleaning agents or cooling lubricants
- Quick and easy mounting due to universally compatible M3 threaded mounting holes
- Compact housing saves space (equal to W8 plastic version)
- Highly visible light spot provides easy alignment
- All necessary accessories are included, which simplifies installation
Your benefits
| Features | |
| Dimensions (W x H x D):: | 11 mm x 21 mm x 33.3 mm |
| Sensing range max.: | 0 m ... 45 m |
| Sensing range: | 0 m ... 20 m |
| Housing desig (light emission): | Cuboid |
| Light source: | LED 1) |
| Type of light: | visible red light |
| Wave length: | 645 nm |
| Adjustment of operating distance: | Potentiometer, 270 |
| Sensor/detection principle: | Through-beam photoelectric sensor |
| Light spot (distance): | 900 mm (20 m) |
| 1) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 69K |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 10 % 2) |
| Switching output: | NPN, light/dark-switching, selectable via light/dark selector |
| Output current Imax.: | 100 mA |
| Response time: | ≤ 0.5 ms 3) |
| Switching frequency: | 1,000 Hz 4) |
| Connection type: | Cable, 3-wire, 2 m 5) |
| Cable material: | PVC |
| Conductor cross-section: | 0.18 mm2 |
| Protection class: | III |
| Circuit protection: | A B D 6) 7) 8) |
| Weight: | 83.6 g |
| Housing material: | 316L |
| Ambient temperature, operation: | -30 C ... 60 C 9) |
| Ambient temperature, storage: | -40 C ... 70 C |
| Items supplied: | BEF-W100-A stainless steel mounting bracket (1.4301 / 304) |
| Signal voltage NPN HIGH / LOW: | approx. VS / < 1.8 V |
| Power consumption, sender: | ≤ 15 mA 10) |
| Power consumption, receiver: | ≤ 20 mA 11) |
| Angle of reception: | 15 |
| Angle of dispersion: | 2.5 |
| 1) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Signal transit time with resistive load 4) With light/dark ratio 1:1 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) B = inputs and output reverse-polarity protected 8) D = outputs overcurrent and short-circuit protected 9) At an air humidity of 35 ... 95 % 10) 11) Receiver without load | |
Contact Us
Hot Products