Add To Cart
share
Sick WL100-N4409 Description
- Standardized miniature housing with integrated M3 threaded mounting holes
- Optics with standardized red LED or bright light LED
- Standard optics
- Version specially for transparent objects
- Highly visible light spot (bright light models)
- High optical operating reserve
- Detection of reflective plastic surfaces at close range (bright light models)
- Simple, standardized mounting
- Version for detection of transparent objects
Your benefits
| Features | |
| Dimensions (W x H x D):: | 11 mm x 31 mm x 20 mm |
| Sensing range max.: | 0.1 m ... 7.5 m 1) |
| Sensing range: | 0.1 m ... 6 m 2) |
| Housing desig (light emission): | Slim |
| Light source: | BrightLight-LED 3) |
| Type of light: | visible red light |
| Wave length: | 645 nm |
| Light spot diameter (distance): | 150 mm (4 m) |
| Adjustment: | adjustable |
| Sensitivity adjustment: | Adjustable Potentiometer, 270 |
| 1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 10 % 2) |
| Power consumption: | ≤ 30 mA 3) |
| Switching output: | NPN, light/dark-switching, manually selectable, open collector |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 0.5 ms 4) |
| Switching frequency: | 1,000 Hz with light/dark ratio 1:1 |
| Connection type: | Connector M8, 4-pin |
| Number of cores: | 4 |
| Circuit protection: | A B D 5) 6) 7) |
| Weight: | 9 g |
| Housing material: | ABS/PC/POM |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 55 C |
| Ambient temperature, storage: | -40 C ... 70 C |
| Polarisation filter: | ![]() |
| Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 |
| Signal voltage NPN HIGH / LOW: | approx. VS / < 1.8 V |
| Angle of dispersion: | 2 |
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) 3) Without load 4) Signal transit time with resistive load 5) A = VS connections reverse-polarity protected 6) B = inputs and output reverse-polarity protected 7) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products