Add To Cart
share
SICK WSE27-3F2631 Overview
Through-beam Photoelectric Switch WSE27-3F2631 consist of sender and receiver, red light, PNP, rectangular plug, 6 pins, time delay
SICK WSE27-3F2631 Description
- High scanning range, high operating reserves
- Faster alignment with red light
- Reliable operation in industrial environments and in case of ambient light
- Alarm output, front screen heating, test input, time functions
- Operating temperature: -40 C - +60 C
- UL approval
- Less downtime plus resistance to contamination due to high operating reserves
- Flexible usage due to extended functionality e.g. time functions
- Extremely vibration resistant and therefore largely independent of ambient conditions
- For use at temperatures as low as 40 C
- Highly stable housing due to offset fixing holes
Your benefits
| Features | |
| Dimensions (W x H x D):: | 24.6 mm x 80.6 mm x 54 mm |
| Sensing range max.: | 0 m ... 35 m |
| Sensing range: | 0 m ... 25 m |
| Light source: | LED 1) |
| Type of light: | visible red light |
| Wave length: | 645 nm |
| Light spot diameter (distance): | 600 mm (25 m) |
| Adjustment: | adjustable |
| Sensitivity adjustment: | Adjustable Potentiometer |
| Delay time: | adjustable via time delay selector switch: 0.02 ... 0.5 s 0.5 ... 10 s |
| Time type: | Switch on delay time delay off switch on delay and time delay off |
| 1) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 65 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | ≤ 5 Vpp 2) |
| Switching output: | PNP, light/dark-switching, Complementary |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 500 s 3) |
| Switching frequency: | 1,000 Hz with light/dark ratio 1:1 |
| Connection type: | connector Q6, 6-pin, DC-coding |
| Number of cores: | 6 |
| Protection class: | II 4) |
| Circuit protection: | A B C 5) 6) 7) |
| Weight: | 200 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -40 C ... 60 C |
| Ambient temperature, storage: | -40 C ... 75 C |
| Test input sender off: | TE to 0 V |
| Signal voltage PNP HIGH / LOW: | approx. VS - 2.5 V / 0 V |
| Power consumption, sender: | 35 mA 8) |
| Power consumption, receiver: | 20 mA 9) |
| Angle of reception: | 3 |
| Angle of dispersion: | 1.5 |
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Signal transit time with resistive load 4) Reference voltage 50 V DC 5) A = VS connections reverse-polarity protected 6) B = inputs and output reverse-polarity protected 7) C = interference suppression 8) 9) Without load | |
Contact Us
Hot Products