Add To Cart
share
SICK WLR2-P610S01 Overview
WLR2-P610S01 Photoelectric Reflex switch Logic function: single feed, single release, sleep mode, awake mode, cable for motorized roller
SICK WLR2-P610S01 Description
- Sensor, logic, and valve (solenoid valve/engine actuation) product variants available in a single housing or as individual units.
- Housing design adapted to suit roller conveyor modules
- Integrated logic ensures controlled flow of goods on conveyor systems, e.g. single feed, block feed, single release, or block release
- Electrical output for motor actuation or integrated solenoid valve
- Modular structure (with or without solenoid valve or motor actuation, with or without logic)
- All-in-one solution: sensor + logic + valve in one housing
- Space-saving and protected mounting, integration below conveying level
- The ideal standalone solution, saving on cabling, simplifying control, and permitting clearly structured, modular expansion of conveyor systems
- Controlled flow of goods with starting/stopping within a conveyor belt - easy and reliable
- Very high availability of the conveyor systems thanks to controlled flow of materials - and therefore reduced costs
- Flexible process engineering through modularity
Your benefits
| Features | |
| Type of light: | visible red light |
| Enclosure rating: | IP 54 |
| Dimensions (W x H x D):: | 18 mm x 99.5 mm x 46 mm |
| Sensing range: | 250 mm ... 5,000 mm 1) |
| Sensor principle: | Photoelectric retro-reflective sensor |
| Adjustment: | adjustable |
| Sensitivity adjustment: | Adjustable Sensitivity adjustment |
| 1) REF-3290-K | |
| Mechanics/electronics | |
| Switching output: | PNP, light switching |
| Housing material: | ABS |
| Weight: | 110 g |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | < 5 Vpp 2) |
| Power consumption: | < 25 mA 3) |
| Signal voltage PNP HIGH / LOW: | approx. VS - < 2.0 V / 0 V |
| Output current Imax.: | ≤ 100 mA |
| Switching frequency: | 250 Hz |
| Connection type: | Connector M12, 4-pin 4) |
| Connection for adjacent sensor: | Cable with receptacle, M12, 4-pin |
| Number of cores: | 4 |
| VDE protection class: | II 5) |
| Circuit protection: | A C D 6) 7) 8) |
| Number of sensors in series: | ca. 30 9) |
| Actuator control: | electrical, without magnetic valve, pneumatic |
| Logical functions: | awake mode, single release, individual feed, sleep mode |
| Connection type to motor/valve: | Leitung, 2-adrig, 1,5 m |
| Cable material: | PVC |
| 1) Limit values 2) May not exceed or fall short of VS 3) Without load, without valve 4) Do not bend below 0 C 5) Reference voltage 50 V DC 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected 9) Maximum per power supply at 27.6 V DC, as well as dependent on the solenoid valve (1 W)/motor | |
| Ambient data | |
| Ambient temperature, operation: | -40 C ... 60 C |
| Ambient temperature, storage: | -40 C ... 75 C |
Contact Us
Hot Products