SICK VL18-4P3440 (6013587)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK VL18-4P3440 (6013587)

Add To Cart

Photoelectric Reflex Switch, +Polf., LED-red; VL18-4P3440

Your benefits

Standardized design enables simple assembly and alignment and simple replacement of the device
Suitable for standard applications
Suitable for signal processing e.g. with AS-i coupling modules or M12 distributor islands
Flexibility in case of restricted installation space

Features
Sensing range max.:	0.05 m ... 3.7 m ¹⁾
Sensing range:	0.05 m ... 3 m ²⁾
Housing desig (light emission):	angled 90
Light source:	LED ³⁾
Type of light:	visible red light
Adjustment:	adjustable
Sensitivity adjustment:	Potentiometer, 270
Housing length:	75 mm
Thread diameter (housing):	M18 x 1
Sensor/detection principle:	Photoelectric retro-reflective sensor
Light spot (distance):	150 mm (3 m)
Optical axis:	radial
¹⁾ ²⁾ C110A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	≤ 10 % ²⁾
Power consumption:	≤ 30 mA ³⁾
Switching output:	PNP, light/dark-switching, Selectable via L/D control wire, open collector ⁴⁾
Output current Imax.:	100 mA
Response time:	≤ 2 ms ⁵⁾
Switching frequency:	250 Hz with light/dark ratio 1:1
Connection type:	Connector M12, 4-pin
Protection class:	III
Circuit protection:	A B C D ⁶⁾ ⁷⁾ ⁸⁾ ⁹⁾
Weight:	120 g
Housing material:	Nickel-plated brass
Optics material:	PMMA
Ambient temperature, operation:	-25 C ... 70 C
Polarisation filter:
Angle of dispersion:	2.8
¹⁾ Limit values ²⁾ ³⁾ Without load ⁴⁾ Control wire open: dark-switching D.ON ⁵⁾ Signal transit time with resistive load ⁶⁾ A = VS connections reverse-polarity protected ⁷⁾ B = inputs and output reverse-polarity protected ⁸⁾ C = interference suppression ⁹⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products